Formlabs · SLS · Fuse 1+ 30W Official Formlabs Distributor

Formlabs Fuse 1+ 30W — Buy in Ukraine

Formlabs Fuse 1+ 30W — buy in Ukraine from the official Formlabs distributor. Industrial-grade nylon parts on a benchtop footprint, no support structures. Manufacturer warranty, local support and operator training; installation included with printer packages.

  • 165 × 165 × 300 mmbuild volume
  • 30 Wytterbium fiber laser · 247 µm spot
  • 110 µmlayer thickness
  • 8compatible powders

Technical specifications

Technology
SLS — selective laser sintering
Build volume
165 × 165 × 300 mm (8.2 L)
Layer thickness
110 µm (0.004″)
Throughput
0.063 kg/h · typical job ~7 h (95% of jobs up to 14 h)
Materials
8 powders: Nylon 12 / Nylon 12 White / Nylon 12 Tough / Nylon 12 GF, Nylon 11 / Nylon 11 CF, TPU 90A, Polypropylene
Laser
Ytterbium fiber, 30 W
Laser spot size
247 µm
Build atmosphere
Air; nitrogen (N₂) optional for Nylon 11, Nylon 11 CF and TPU 90A
Powder hopper
14.5 L
Printer dimensions
64.5 × 68.5 × 107 cm (165.5 cm with stand)
Weight
120 kg (without build chamber and powder)
Power (EU)
230 V, 7.5 A
Touchscreen
10.1″, 1280 × 800
Connectivity
Wi-Fi (2.4 + 5 GHz), Ethernet 1000 Mbit, USB 2.0
System start-up
Under 60 minutes
Software
PreForm (free)

Why production teams choose SLS on the Fuse 1+ 30W

No support structures

No support structures

The Fuse 1+ 30W sinters nylon powder layer by layer; the part forms inside a powder bed that holds it in place. Moving joints, internal cavities and nested assemblies print in one job with minimal post-processing.

Isotropic strength

Isotropic strength

Sintered nylon parts carry load equally in all axes — mechanical properties that FDM and SLA do not provide.

Dense, multi-tier chamber packing

Dense, multi-tier chamber packing

Because nothing needs support, parts can be stacked through the full build volume. A tightly packed chamber lowers the cost per part.

Swappable build chambers

Swappable build chambers

A new batch starts while the previous chamber is still cooling. With a second chamber the print / cool-down / unpack cycle runs continuously.

Up to 70% powder recovery

Up to 70% powder recovery

Unsintered powder is sieved on Fuse Sift and returned to the next print — up to 70% of unused material goes back into production.

Up to 2× faster than Fuse 1

Up to 2× faster than Fuse 1

With the 30 W fiber laser the Fuse 1+ 30W prints up to twice as fast as the original Fuse 1, and the system starts up in under 60 minutes.

Inside the Fuse 1+ 30W

Official Formlabs technology clips for the Fuse 1+ 30W and its powder ecosystem.

High-power laser 30 W fiber laser.
Powder flow system
Modular build chamber Swappable build chamber on the printer stand.
Inert nitrogen environment Nitrogen inlet for printing in an inert atmosphere.
Contained powder ecosystem Fuse Sift with the vacuum and powder cartridge.
Touchscreen interface
Printing Removing the build chamber after a print.
Fuse Sift Moving the build chamber to the powder recovery station.
Fuse Blast Automated media blasting of SLS parts.
Maintenance Routine maintenance on the touchscreen.

Formlabs service

Warranty and service plans for Fuse 1+ 30W

Fuse printers come with a 1-year Formlabs factory warranty. Service plans add accidental damage cover and preventive maintenance visits; the Production plan for printer fleets also covers wear parts, calibration and an Uptime Spare Parts Kit.

Warranty, Complete and Production: what is included

What is includedFactory warrantyCompleteProduction
Who can buy itevery new printerFuse 1 Series owners3+ Fuse 1 Series printers; required for Fuse X1
Term1 year1, 3 or 5 yearsup to 5 years
Repairs and parts: printer, Fuse Sift, Fuse Blast, build chambersyesyesyes
Accidental damage (with exclusions)noyesyes
Preventive maintenanceno1 visit a year2 visits a year
Wear parts: quartz tubes, filters, gasketsnonoyes
Onsite calibration with a reportat extra costat extra costyes
Onsite repairyesyesyes; Formlabs states 2 business days
Uptime Spare Parts Kitat extra costat extra costyes

✓ included · — not included · extra: at extra cost · 3+ / X1: 3 or more Fuse 1 Series printers, or Fuse X1 · 2 d: onsite time stated by Formlabs

Fuse 1+ 30W: no package includes a service plan; the 1-year Formlabs factory warranty applies, and the Fuse Series Complete Service Plan is added separately.

The Production Service Plan is for fleets of 3 or more Fuse 1 Series printers and is required for Fuse X1. It includes everything in Complete, plus a second preventive maintenance visit a year, wear-part cover, onsite calibration with a report, onsite repair (Formlabs states 2 business days) and an Uptime Spare Parts Kit.

What the Fuse Series Complete Service Plan includes

  • Accidental damage cover.
  • One preventive maintenance visit a year; an unused visit does not roll over.
  • Repairs, parts and onsite repair as under the warranty, including the Fuse Sift, Fuse Blast and build chambers.

Not included

  • Wear parts and consumables: quartz tubes, filters, gaskets.
  • Onsite calibration with a report and the Uptime Spare Parts Kit: these are ordered at extra cost.
Plan terms
  • Coverage starts on the date the printer ships.
  • You can renew before coverage ends or within 30 days after; later renewals need a paid recertification by Formlabs.
  • Total coverage is capped at 5 years from shipment.
  • A plan is tied to one printer and cannot be transferred to another device or owner.
  • It is paid upfront and is non-refundable.
  • If a plan is bought after shipment, Formlabs may first inspect the printer at the owner's cost.
  • For onsite visits to Fuse printers, the engineer's travel and accommodation may be charged separately, depending on the country.
Service in Ukraine
  • Formlabs has no online store in Ukraine: printers and service plans are sold by authorized Formlabs partners.
  • We register the service plan with your printer, handle installation and operator training, and provide warranty service.
  • Remote support comes from Formlabs, in English and several other European languages. Our service team answers in Ukrainian.
  • Outside Formlabs' shipping zones, authorized partners supply replacement parts and units.
  • Some services are not available in every country, so we list the exact plan on your invoice.

Source: Formlabs service-plan pages and the Formlabs Hardware Service Terms, checked 23 October 2026.

From powder to finished part: a closed loop

  1. 01

    01 · Print — Fuse 1+ 30W

    Nylon powder is sintered with the 30 W fiber laser. A print cycle takes 2–18 hours depending on how densely the chamber is packed.

  2. 02

    02 · Recover powder — Fuse Sift

    Parts are extracted and the unused powder is sieved: up to 70% returns to the next print. HEPA filtration keeps the workspace clean.

  3. 03

    03 · Clean and finish — Fuse Blast

    Automated media blasting cleans a full chamber of parts in about 15 minutes, with a matte or semi-gloss finish.

Prices are in UAH incl. VAT for the Ukrainian market; contact us for export pricing.

Frequently asked questions

Which materials does the Fuse 1+ 30W support?

Eight compatible powders: Nylon 12, Nylon 12 White, Nylon 12 Tough, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A and Polypropylene.

Does the Fuse 1+ 30W need nitrogen?

Not for Nylon 12 — it prints in an air atmosphere. For Nylon 11, Nylon 11 CF and TPU 90A, nitrogen purging is recommended to reach maximum mechanical properties.

Are support structures needed for SLS printing?

No. The unsintered powder holds the parts in place, so you can print moving joints and complex internal cavities and pack the chamber with parts in several tiers.

Is the Fuse 1+ suitable for serial production?

Yes. With swappable build chambers the Fuse 1+ is optimised for runs of 100–1000+ parts. A full chamber holds 50–200 parts depending on their size. For batches of 100–500 pieces it is often more economical than silicone moulding.

What is included in the High Efficiency Package?

The printer with a build chamber, Fuse Sift, Fuse Blast with the polishing module and vacuum, a second build chamber, 2 powder cartridges, 40 kg of Nylon 12 and the 1-year Formlabs factory warranty. Two chambers give a continuous cycle: while one prints, the other cools down and is unpacked.

Fuse 1+ 30W or Fuse X1 — which one to choose?

The Fuse 1+ is compact and works with 8 materials today. The Fuse X1 is a large-format system with 5.2× the throughput. For getting started and for mid-size series — Fuse 1+; for large parts — Fuse X1.

Send your STL/STEP — quote within one hour

Official Formlabs distributor in Ukraine, production facility in Kyiv, international shipping on request.

Українською
Telegram Viber +380 (95) 661-68-66