How much does the Fuse Sift cost in Ukraine?

UAH 607,439, in stock at 3Dprint.ua. Accessories: Glovebox Bundle — UAH 21,202, 150/300 sieves — UAH 5,407 each, funnel — UAH 1,215, extra build chamber — UAH 242,939.

How much powder does the Fuse Sift recover?

Up to 80% of unsintered powder is sieved and returned to the next print. The station automatically blends recovered powder with fresh powder at the set refresh ratio.

Which printers is the Fuse Sift compatible with?

The Fuse 1 and Fuse 1+ 30W. The large-format Fuse X1 uses a separate station — the Fuse Sift X1.

What does the Fuse Sift do?

Four operations in one device: extracting parts from the build chamber, sieving used powder, storage, and automatic dosing of the mix for the next print.

Does the Fuse Sift protect against dust?

Yes: a negative-pressure work area and HEPA filtration keep powder inside the station. For full containment, a Glovebox Bundle is available.

FORMLABS · SLS · POST-PROCESSING · IN STOCK

Fuse Sift:
your powder, reused

Name: Formlabs Fuse Sift
Brand: Formlabs
Price: 607439 UAH
Availability: InStock

The powder-recovery station for the Fuse 1 and Fuse 1+ 30W: part extraction, sieving, storage and automatic dosing — four operations in one device. Up to 80% of powder returns to printing.

Buy Fuse Sift → How it works

FORMLABS · FUSE SIFT

80%

of powder back into printing

4in 1

extract · sieve · store · dose

HEPA

filtration + negative pressure

607 439₴

in stock in Ukraine

KEY FACTS · UPDATED 11 JUN 2026

The Fuse Sift combines part extraction, sieving, storage and powder dosing.
Up to 80% of unsintered powder is recovered and returned to the next print.
Automatic blending of recovered and fresh powder at the set ratio.
HEPA filtration and negative pressure — powder stays inside the station.
Compatibility: Fuse 1 and Fuse 1+ 30W. For the Fuse X1 — a separate station, Fuse Sift X1.
Price in Ukraine — UAH 607,439, in stock.
Accessories: Glovebox Bundle, 150/300 sieves, funnel, extra build chambers.
3Dprint.ua (LLC 3Dprint) — authorized Formlabs partner in Ukraine.

FIG. 01 · WORKFLOW

HOW IT WORKS · 4 OPERATIONS

From a printed chamber —
to ready-to-use powder.

Pull the build chamber out of the printer, slot it into the Fuse Sift — and the station does the rest: you remove the parts while the powder is sieved, cleaned and blended with fresh powder for the next job.