Formlabs SLS Powder — Buy in Ukraine
Formlabs SLS powders — official distributor in Ukraine. PA12 (Nylon 12), PA11 (Nylon 11), Nylon 11 CF, TPU 90A and more, for the Fuse series.
- 8powders for Fuse 1+ 30W
- 110 µmlayer thickness
- up to 70%powder recovered via Fuse Sift
- 165 × 165 × 300 mmFuse 1+ 30W build volume
Powder handling on Fuse 1+ 30W
- Technology
- SLS, selective laser sintering
- Layer thickness
- 110 µm (0.004 in)
- Materials
- 8 powders: Nylon 12 / White / Tough / GF, Nylon 11 / CF, TPU 90A, PP
- Environment
- air; nitrogen (N₂) optional for Nylon 11 / CF / TPU
- Powder hopper
- 14.5 L
- Powder recovery
- up to 70% returned to print via Fuse Sift
- Build volume
- 165 × 165 × 300 mm (8.2 L)
Why SLS nylon powder
No support structures
Fuse 1+ 30W sinters nylon powder layer by layer; the part forms inside a bed of unsintered powder that supports it. Moving joints, internal cavities and nested parts print without supports, and the chamber can be packed with parts in several tiers.
Isotropic strength
SLS parts carry load equally in every axis, with mechanical properties that FDM and SLA do not offer. Minimal post-processing.
Powder recovery
Up to 70% of unused powder is recovered through Fuse Sift and returned to the next print. Part extraction and sieving, with HEPA filtration.
Air or nitrogen atmosphere
Nylon 12 prints in an air environment, no nitrogen required. For Nylon 11, Nylon 11 CF and TPU 90A a nitrogen purge is recommended to reach maximum mechanical properties.
SLS powders — prices
Prices in UAH incl. VAT, as listed for the Ukrainian market — identical to the checkout price. For export pricing, contact us.
SLS powders for Fuse 1+ 30W
Formlabs SLS powders in our catalogue, from general-purpose PA 12 to carbon-filled PA 11 and elastic TPU.
Best seller
SLS · Fuse 1+
Nylon 12 Powder
The most popular SLS material: strong functional parts with no supports; 10 kg. 63,110 UAH
SLS · Fuse 1+
Nylon 12 GF Powder
Nylon 12 with 30% glass fibre for higher stiffness in housings and brackets. 41,002 UAH
SLS · Fuse 1+
Nylon 12 Tough Powder
Higher impact toughness and UV resistance for parts that take impacts. 63,110 UAH
SLS · Fuse 1+
Nylon 11 Powder
Bio-based nylon 11, more flexible and impact-resistant than Nylon 12. For clips and prosthetics. 44,160 UAH
SLS · Fuse 1+
Nylon 11 CF Powder
PA 11 + carbon fibre: the stiffest and lightest Formlabs SLS material. 63,110 UAH
SLS · Fuse 1+
TPU 90A Powder
Flexible TPU powder for resilient parts: soles, gaskets, treads. 50,477 UAH
SLS · Fuse 1+
Polypropylene Powder
SLS powder with polypropylene properties: containers, valves, lids. 27,676 UAH
Material clips
Formlabs clips: printed SLS parts by powder, then how the powder is handled and recovered.
Powders and parts
Frequently asked questions
Which powders does Fuse 1+ 30W support?
Eight compatible powders: Nylon 12, Nylon 12 White, Nylon 12 Tough, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A and Polypropylene.
Is nitrogen required for SLS printing?
For Nylon 12, no: printing runs in an air environment. For Nylon 11, Nylon 11 CF and TPU 90A a nitrogen purge is recommended for maximum mechanical properties.
Are support structures needed in SLS?
No. The unsintered powder holds the parts. This allows printing moving joints and complex cavities, and packing the build chamber with parts in several tiers.
Is Fuse 1+ suitable for batch production?
Yes. With swappable Build Chambers, Fuse 1+ is optimised for runs of 100-1000+ parts. A full chamber can hold 50-200 parts depending on size. It is often more cost-effective than silicone moulding for batches of 100-500 pieces.
Send your STL/STEP — quote within one hour
Official Formlabs distributor in Ukraine, production facility in Kyiv, international shipping on request.