Formlabs SLS powders · Fuse series Official Distributor

Formlabs SLS Powder — Buy in Ukraine

Formlabs SLS powders — official distributor in Ukraine. PA12 (Nylon 12), PA11 (Nylon 11), Nylon 11 CF, TPU 90A and more, for the Fuse series.

  • 9powders for Fuse 1+ 30W
  • 110 µmlayer thickness
  • up to 70%powder recovered via Fuse Sift
  • 165 × 165 × 300 mmFuse 1+ 30W build volume
Formlabs Nylon 11 CF Powder parts printed on the Fuse 1+ 30W

Powder handling on Fuse 1+ 30W

Technology
SLS, selective laser sintering
Layer thickness
110 µm (0.004 in)
Materials
9 powders: Nylon 12 / White / Tough / GF, Nylon 11 / CF / Pro, TPU 90A, PP
Environment
air; nitrogen (N₂) recommended for Nylon 11 / 12 White, required for Nylon 11 CF / Pro
Powder hopper
14.5 L
Powder recovery
up to 70% returned to print via Fuse Sift
Build volume
165 × 165 × 300 mm (8.2 L)

Why SLS nylon powder

No support structures

No support structures

Fuse 1+ 30W sinters nylon powder layer by layer; the part forms inside a bed of unsintered powder that supports it. Moving joints, internal cavities and nested parts print without supports, and the chamber can be packed with parts in several tiers.

Isotropic strength

Isotropic strength

SLS parts carry load equally in every axis, with mechanical properties that FDM and SLA do not offer. Minimal post-processing.

Powder recovery

Powder recovery

Up to 70% of unused powder is recovered through Fuse Sift and returned to the next print. Part extraction and sieving, with HEPA filtration.

Air or nitrogen atmosphere

Air or nitrogen atmosphere

Nylon 12, Nylon 12 Tough, Nylon 12 GF and TPU 90A print in an air environment, no nitrogen required. Formlabs recommends a nitrogen atmosphere for Nylon 11, to maintain its documented material properties, and for Nylon 12 White, to keep parts consistently white. Nylon 11 CF and Nylon 11 Pro require a nitrogen atmosphere, per Formlabs.

SLS powders for Fuse 1+ 30W

Formlabs SLS powders in our catalog, from general-purpose PA 12 to carbon-filled PA 11 and elastic TPU.

Nylon 12 PowderBest seller SLS · Fuse 1+ Nylon 12 Powder General-purpose SLS powder: strong functional parts with no supports; 10 kg. PA 12StrongWear-resistantGeneral purpose 65,740 UAH Nylon 12 White Powder SLS · Fuse 1+ 30W Nylon 12 White Powder White Nylon 12 for Fuse 1+ 30W: medical devices, high-contrast detailed models and functional prototypes that are easy to dye; 10 kg. PA 12WhiteDyeableBiocompatible 69,427 UAH Nylon 12 GF Powder SLS · Fuse 1+ Nylon 12 GF Powder Nylon 12 with 30% glass fiber for higher stiffness in housings and brackets. Glass-filledStiffPA 12 GFHigher hardness 41,002 UAH Nylon 12 Tough Powder SLS · Fuse 1+ Nylon 12 Tough Powder Higher impact toughness and UV resistance for parts that take impacts. PA 12 ToughImpact-resistantWear-resistantUV-resistant 63,110 UAH Nylon 11 Powder SLS · Fuse 1+ Nylon 11 Powder Bio-based nylon 11, more flexible and impact-resistant than Nylon 12. For clips and prosthetics. PA 11FlexibleImpact-resistantBio-based 44,160 UAH Nylon 11 CF Powder SLS · Fuse 1+ Nylon 11 CF Powder PA 11 + carbon fiber: stiff, lightweight parts for Fuse 1+ 30W. Carbon fiberLightweightStiffHeat-resistant 63,110 UAH Nylon 11 Pro PowderNew SLS · Fuse 1+ 30W Nylon 11 Pro Powder Per Formlabs, about 5× the elongation at break and nearly 2× the impact resistance of Nylon 12, at the same 30% refresh rate. Requires nitrogen on Fuse 1+ 30W; 10 kg. PA 11Impact-resistantLiving hinges30% refresh rate 69,485 UAH TPU 90A Powder SLS · Fuse 1+ TPU 90A Powder Flexible TPU powder for resilient parts: soles, gaskets, treads. ElasticShore 90ARubber-likeComplex geometries 50,477 UAH Polypropylene Powder SLS · Fuse 1+ Polypropylene Powder SLS powder with polypropylene properties: containers, valves, lids. PP-likeLightweightChemically resistant 27,676 UAH

Material clips

Formlabs clips: printed SLS parts by powder, then how the powder is handled and recovered.

Nylon 12 Powder The SLS workhorse: strong functional parts, prototypes and production runs.
Nylon 11 Powder Ductile, impact-resistant parts: mounts, housings, tooling.
Nylon 12 GF Powder Glass-filled nylon: higher stiffness and thermal stability under load.
TPU 90A Powder Elastomer parts: gaskets, dampers, ergonomic grips.
Powder flow system How powder moves through the Fuse 1+ 30W.
Contained powder ecosystem Fuse Sift, vacuum and powder cartridge.
Powder recovery Build chamber into the Fuse Sift for unpacking and sieving.

Frequently asked questions

Which powders does Fuse 1+ 30W support?

Nine compatible powders: Nylon 12, Nylon 12 White, Nylon 12 Tough, Nylon 12 GF, Nylon 11, Nylon 11 CF, Nylon 11 Pro, TPU 90A and Polypropylene.

Is nitrogen required for SLS printing?

For Nylon 12, Nylon 12 Tough, Nylon 12 GF and TPU 90A, no: printing runs in an air environment. For Nylon 11 and Nylon 12 White, Formlabs recommends nitrogen, to maintain Nylon 11 material properties and to keep Nylon 12 White parts consistently white. For Nylon 11 CF and Nylon 11 Pro, yes: Formlabs lists nitrogen as required.

Are support structures needed in SLS?

No. The unsintered powder holds the parts. This allows printing moving joints and complex cavities, and packing the build chamber with parts in several tiers.

Is Fuse 1+ suitable for batch production?

Yes. With swappable Build Chambers, Fuse 1+ is optimized for runs of 100-1000+ parts. A full chamber can hold 50-200 parts depending on size. It is often more cost-effective than silicone molding for batches of 100-500 pieces.

Send your STL/STEP — quote within one hour

Official Formlabs distributor in Ukraine, production facility in Kyiv, international shipping on request.

Українською
Telegram Viber +380 (95) 661-68-66